Accuracy specifications Function Range Resolution Accuracy ± ([% of Reading] + [Counts]) DC Millivolts 600.0 mV 0.1 mV 0.5 % + 2 DC Volts 6.000 V 60.00 V 600.0 V 0.001 V 0.01 V 0.1 V 0.5 % + 2 Auto-V LoZ true-rms 600.0 V 0.1 V DC, 45 Hz to 500 Hz: 2.0% + 3 500 Hz to 1 kHz: 4.0% + 3 AC millivolts true-rms 600.0 mV 0.1 mV 45 Hz to 500 Hz: 1.0% + 3 500 Hz to 1 kHz: 2.0% + 3 AC volts true-rms 6.000 V 60.00 V 600.0 V 0.001 V 0.01 V 0.1 V 45 Hz to 500 Hz: 1.0% + 3 500 Hz to 1 kHz: 2.0% + 3 Continuity 600 Ω 1 Ω Beeper on < 20 W, off > 250 W; detects opens or shorts of 500 µs or longer Ohms 600.0 Ω 6.000 kΩ 60.00 kΩ 600.0 kΩ 6.000 MΩ 40.00 MΩ 0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ 0.9% + 2 0.9% + 1 0.9% + 1 0.9% + 1 0.9% + 1 1.5% + 2 Input characteristics Function Input impedance (nominal) Common mode rejection ratio (1 kW unbalanced) Normal mode rejection Volt AC > 5 MΩ < 100 pF >60dB at dc, 50 or 60Hz - Volts DC > 10 MΩ < 100 pF >100dB at dc, 50 or 60Hz > 60 dB at 50 or 60Hz Auto-V LoZ ~3 kΩ < 500 pF > 60dB at dc, 50 or 60Hz - Ohms Open circuit test voltage Full scale voltage Short circuit current To 6.0 MΩ To 6.0 MΩ < 2.7 V dc < 0.7 V dc < 0.9 V dc < 350 µA Diode Test < 2.7 V dc 2.000 V dc < 1.2 mA General specifications Function Description Maximum voltage between any terminal and earth ground 600 V Surge protection 6 kV peak per IEC 61010-1 600V CAT III, Pollution Degree 2 W Fuse for A input 11 A, 1000 V FAST 17 kA Fuse (Fluke PN 803293) Display Digital: 6,000 counts, updates 4/sec; Bar Graph: 33 segments, updates 32/sec Temperature Operating: -10°C to +50°C; Storage: -40°C to +60°C Humidity 0% to 90% to 35°C 75% to 40°C 45% to 50°C Temperature coefficient 0.1 x (specified accuracy/°C) (< 18°C or > 28°C) Operating altitude 2,000 meters Battery 9 Volt Alkaline, NEDA 1604A/IEC 6LR61 Battery life Alkaline: 400 hours typical, without backlight Safety compliances ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA C22.2 No 61010-1-04, UL 6101B (2003) and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, Pollution Degree 2, EMC EN61326-1 Certifications UL, CSA, TUV, N10140 , VDE IP rating (dust & water protection) IP42