WiFi Power Pack Specifications DK-USB Power Module Designed for DC input 24V with 1A fuse and DC output with rated voltage of 5.0V and rated current of 500mA. Texture surface. USB is short-circuit. Wireless Standards IEEE 802. 11n, IEEE 802. 11g, IEEE 802. 11b Dimensions (WxDxH) 2.2 x 2.2 x0.7 in. (57 x 57 x 18mm) Antenna Type On-Board Frequency 2.4- 2.4835GHz Single Rate 11n: Up to 150Mbps (dynamic) 11g: Up to 54Mbps (dynamic) 11b: Up to 11Mbps (dynamic) EIRP <20dBm (EIRP) Reception Sensitivity 135M: -70dBm@10%PER 65M: -73dBm@10%PER 54M: -76dBm@10%PER Wireless Modes AP Mode, Router Mode, Client Mode. Repeater Mode, Bridge Mode Wireless Functions Enable/ Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics Wireless Security 64/128/152-bit WEP, WPA/ WPA2 WPA-PSK/ WPA2-PSK WAN Type Dynamic IP/ Static IP/ PPPoE/ PPTP/ L2TP DHCP Server. Client, DHCP Client Quality of Service WMM, Bandwidth Control Dynamic DNS DynaDna, Comexe, NO-IP Auto Power Down Mode 1-5 Minutes Configurable VNP Pass-Through PPTP, L2TP, IPSec (ESP Head) Access Control Local Management Control, Host List, Access Schedule, Rule management Firewall Security DoS, SPI Firewall IP Address Filter/ MAC Address Filter/ Domain Filter IP and MAC Address Binding Management Access Control Local Management Remote Manegment