Thiết bị đo (4085) Dây chuyền sản xuất (69) Thiết bị làm bánh (280)
Thiết bị bếp CN (77) Máy SX thức ăn gia súc (27) Thiết bị giặt là (575)
Bộ lưu điện (509) Thiết bị làm sạch (546) Thiết bị lạnh (607)
Cân điện tử (399) Robot Công nghiệp (41) Máy ngành nhựa (70)
Thiết bị xử lý môi trường (51) Máy cắt kim loại (47) Thiết bị nâng hàng (365)
Máy đóng gói (9) Thang máy (7) Máy hút mùi (521)
Máy sản xuất-chế biến giấy (18) Máy ngành dược (60) Máy cắt chữ (218)
Máy phát điện (2991) Tự động hóa (25) Máy biến áp (329)
Máy hàn (902) Máy đóng mở các loại (174) Máy đánh giầy (90)
Máy bơm (1122) Máy dò kim loại (112) Máy rửa xe (210)
Máy hút bụi (971) Máy hàn chip (8) Máy gia công phong bì (28)
Máy nén khí (1962) Máy kiểm tra dây hàn (7) Máy khắc (238)
Máy sấy khí (65) Máy may (372) Xe máy công nghiệp (15)
Máy trắc địa (292) Thiết bị thực phẩm (267) Máy làm kính (42)
Sắp xếp Xem dạng listXem dạng lưới
Model ST-850 Voltage 90V-600V AC Frequency Response 50/60 Hz Storage Temperature & Humidity -20˚C~60˚C at 90% max. relative humidity Operating Temperature & Humidity -10˚C~40˚C at 80% max. relative humidity Dimensions 134(L) x 85(W) x...
Call

Bảo hành: 12 tháng

Specification Fluke 53 II B Temperature accuracy Above -100 °C: J, K, T, E, and N-type: ±[0.05% + 0.3°C] R and S-type: ±[0.05% + 0.4°C] Below -100 °C: J, K, E, and N-types: ±[0.20% + 0.3°C] T-type: ±[0.50% + 0.3°C] Temperature J-type: -210 °C to 1200 °C K-type: -200 °C to 1372 °C T-type: -250 °C to 400 °C E-type: -150 °C to 1000 °C N-type: -200 °C to 1300 °C R and S-type: 0 °C to 1767 °C Temperature scale ITS-90 Applicable standards NIST-175 Display Resolution 0.1 °C, 0.1 K < 1000 1°C, 1 K >=1000 Environmental Specifications Operating Temperature -10 °C to 50 °C Storage Temperature -40 °C to 60 °C Humidity (Without Condensation) 0% to 90%; 0 °C to 35 °C 0% to 70%; 0 °C to 50 °C Safety Specifications Overvoltage category CSA C22.2 No. 1010.1 1992; EN 61010 Amendments 1,2 Agency Approvals CE, CSA, TÜV (pending) Mechanical and General Specifications Size 173 mm L x 86 mm W x 38 mm Weight 400 g Batteries 3 AA batteries; typical 1000-hour life
Call

Bảo hành: 12 tháng

Phase Presence: From : 100 Vac Nominal Voltage for Phase: To : 600 Vac Presence Indication (The voltage required for the neon Lamps L1, L2, L3 to light up): Frequency : 10-400 Hz Determination of Phase: From : 1 Vac Rotation Field: To : 450 Vac Direction: Frequency : 2-400 Hz Determination of Motor Connections (requires > 1/2 turn of the shaft): From : 1 Vac, To : 600 Vac, Frequency : 2-400 Hz Maximum Current Consumption: 18mA Over Voltage CLASS III: 600V Over Load between all terminals: 600V Battery Ok goes off when battery voltage: < 6.5 Vdc Power Source: 9V (6F22.006P) x 1 battery Dimensions: 153(L) x 72(W) x 35(D) mm Weight: Approx. 185g (battery included) Accessories: Test leads (AL-34), Vinly case, Instruction manual, Battery
Call

Bảo hành: 12 tháng

SPECIFICATION Function 2 in 1 ( 3 PHASE ROTATION TESTER & MOTOR ROTATION FIELD TESTER ). 3 PHASE ROTATION TESTER : To display the phase sequence of 3 phase power system. MOTOR ROTATION FIELD...
Call

Bảo hành: 12 tháng

ANALOG MULTIMETER–Model:DE-360TRN •DCV 0.1V/0.5V/2.5V/10V/50V/250V/1000V •ACV 10V/50V/250V/1000V •DcmA 50uA/2.5mA/25mA/250Ma • OHM x1, x10, x100, x1K, x10K •Diode test Yes •dB test -10dB~+22dB~+62dB •hFE test Yes (insert on deck) •Iceo test Yes •LED Yes
Call

Bảo hành: 12 tháng

- Display: Analog meter - Meter protection: Overload protection by diode - Range selection: Manual-ranging - Power supply: 1.5V R6P (AA) and 9V 6F22 batteries x 1 each - Fuse: 0.75A/250V (5.2Ф x 20mm)...
Call

Bảo hành: 12 tháng

1. INTRODUCTION This Multi-meter is an battery-powered, rear tilt-standby, easy-operated, heavy-safety handheld instrument with robust protective holster alongside and the adjustable back with hook-up design. It can offer accurate, reliable measurements of DC/AC Voltage, +/-Null DCV, DC Current, Resistance and DioDE, LED, Transistor, Decibels, Continuity test and Capacitance with very high sensitive quality movement, double-sides glass-epoy PCB & good – designed circuit, as well as mirrored AL dial plate esc. It has the perfect full overload & mis-used protection via two Fuses, Oxide Varactor & Diodes. It is an instrument for indoor use in the laboratory, school, workshop, hobby and home application. 2. SPECIFICATIONS Safety Category: IEC61010-1, CAT II 1000V, CAT III 500V and Pollution Degree 2. Common Environment: 23ºC ± 5ºC, less than 75% RH. Temperature ranges: 0 ºC to 40 ºC, 32ºF to 104 ºF for operating condition. -10 ºC to 50ºC, 14 ºF to 122 ºF for Storage condition. Humidity Scope: operating condition less than 90% RH. Storage condition: less than 80% RH. Size: 160(W)x 105(D)x 40(H) MM Weight: 390g approx. (including batteries 3 pcs) Accessories: one set of Test Leads; two Spare Fuses: 0.5A/250V & 10A/250V, Additional Option Accessory, CT-1 special for capacitance measurements 1 set Test Function Range Accuracy Remarks DC V 0-0.1-2.5-10-50-250V-1000V ±3% FSD ±4% FSD. For 1000V Input Impendance: 20KΩ/V Overload protection: Max.1000V AC/DC BUT 0.1V/2.5V/10V 250V Max Null DC V ±5V, ±25V ±5% FSD Input Impendance: 40KΩ/V Overload 1000V Max AC V 0-10-50-250V -1000V ±4% FSD ±5% FSD. For 1000V Input Impendance: 9KΩ/V Overload protection: Max.1000V AC/DC BUT 10V/50Vonly 250V Max Band with: ~10KHz40 DC mA 0-0.05-2.5-25-250 mA, 10A ±3% FSD ±4% FSD. For 10A Drop Voltage: 250mV, overload protected by Fuses 0.5A/250V& 10A/250V at 10A range, and Oxide Varactor <250v, AC/DC(5s) Max.testting time 1 min. for 10A Ω X 1: 0.2~2KΩ Midscale at 20Ω X 10: 2~20KΩ Midscale at 200Ω X 100: 20~200KΩ Midscale at 2000Ω X 1K: 200~2MΩ Midscale at 20KΩ X 10K: 2K~20MΩ Midscale at 200KΩ ±4% of ARC of Scale Length Overload protected by the oxide Varactor & Fuse<250V, AC/DC (5s) Capacitance (uF) 0.025-0.25-2.5uF(C2), 2000uF(C1) ±3% FSD Approximate Value Use the Aaccessory Kit, Use the Rx1K range BATT Check 0~1.5V: GOOD-?-BAD 0~9V: GOOD-?-BAD ±5% of ARC of Scale Length Load current: 270mA for 1.5V 250mA for 9V Overload protected by the oxide Varactor & Fuse<250V, AC/DC (5s) Transistor check hPE: 0-1000 via special Hfe socket Approximate Value At Ω x 10 range Led diod check Via special Hfe socket Approximate Value At Ω x 10 range Decibel -22dB~+62 dB (0dB=1mW at 600Ω) Approximate Value Continuity Check Beeper sounding under 200 Ohm Overload protected by the oxide Varactor & Fuse<250V, AC/DC (5s) POWER Source Internal Battery: R6P, AA, 1.5V 2pcs, 6F22, NEDA 1604, 9V 1
Call

Bảo hành: 12 tháng

1. INTRODUCTION This Multi-meter is an battery-powered, rear tilt-standby, easy-operated, heavy-safety handheld instrument with robust protective holster alongside and the adjustable back with hook-up design. It can offer accurate, reliable measurements of DC/AC Voltage, +/-Null DCV, DC Current, Resistance and DioDE, LED, Transistor, Decibels, Continuity test and Capacitance with very high sensitive quality movement, double-sides glass-epoy PCB & good – designed circuit, as well as mirrored AL dial plate esc. It has the perfect full overload & mis-used protection via two Fuses, Oxide Varactor & Diodes. It is an instrument for indoor use in the laboratory, school, workshop, hobby and home application. 2. SPECIFICATIONS Safety Category: IEC61010-1, CAT II 1000V, CAT III 500V and Pollution Degree 2. Common Environment: 23ºC ± 5ºC, less than 75% RH. Temperature ranges: 0 ºC to 40 ºC, 32ºF to 104 ºF for operating condition. -10 ºC to 50ºC, 14 ºF to 122 ºF for Storage condition. Humidity Scope: operating condition less than 90% RH. Storage condition: less than 80% RH. Size: 160(W)x 105(D)x 40(H) MM Weight: 390g approx. (including batteries 3 pcs) Accessories: one set of Test Leads; two Spare Fuses: 0.5A/250V & 10A/250V, Additional Option Accessory, CT-1 special for capacitance measurements 1 set Test Function Range Accuracy Remarks DC V 0-0.1-2.5-10-50-250V-1000V ±3% FSD ±4% FSD. For 1000V Input Impendance: 20KΩ/V Overload protection: Max.1000V AC/DC BUT 0.1V/2.5V/10V 250V Max AC V 0-10-50-250V -1000V ±4% FSD ±5% FSD. For 1000V Input Impendance: 9KΩ/V Overload protection: Max.1000V AC/DC BUT 10V/50Vonly 250V Max Band with: ~10KHz40 DC mA 0-0.05-2.5-25-250 mA, 10A ±3% FSD ±4% FSD. For 10A Drop Voltage: 250mV, overload protected by Fuses 0.5A/250V& 10A/250V at 10A range, and Oxide Varactor <250v, AC/DC(5s) Max.testting time 1 min. for 10A Ω X 1: 0.2~2KΩ Midscale at 20Ω X 10: 2~20KΩ Midscale at 200Ω X 100: 20~200KΩ Midscale at 2000Ω X 1K: 200~2MΩ Midscale at 20KΩ X 10K: 2K~20MΩ Midscale at 200KΩ ±4% of ARC of Scale Length Overload protected by the oxide Varactor & Fuse<250V, AC/DC (5s) Capacitance (uF) 0.025-0.25-2.5uF(C2), 2000uF(C1) ±3% FSD Approximate Value Use the Aaccessory Kit, Use the Rx1K range BATT Check 0~1.5V: GOOD-?-BAD 0~9V: GOOD-?-BAD ±5% of ARC of Scale Length Load current: 270mA for 1.5V 250mA for 9V Overload protected by the oxide Varactor & Fuse<250V, AC/DC (5s) Transistor check hPE: 0-1000 via special Hfe socket Approximate Value At Ω x 10 range Led diod check Via special Hfe socket Approximate Value At Ω x 10 range Decibel -22dB~+62 dB (0dB=1mW at 600Ω) Approximate Value Continuity Check Beeper sounding under 200 Ohm Overload protected by the oxide Varactor & Fuse<250V, AC/DC (5s) POWER Source Internal Battery: R6P, AA, 1.5V 2pcs, 6F22, NEDA 1604, 9V 1
Call

Bảo hành: 12 tháng

1. INTRODUCTION This Multi-meter is an battery-powered, rear tilt-standby, easy-operated, heavy-safety handheld instrument with robust protective holster alongside and the adjustable back with hook-up design. It can offer accurate, reliable measurements of DC/AC Voltage, +/-Null DCV, DC Current, Resistance and DioDE, LED, Transistor, Decibels, Continuity test and Capacitance with very high sensitive quality movement, double-sides glass-epoy PCB & good – designed circuit, as well as mirrored AL dial plate esc. It has the perfect full overload & mis-used protection via two Fuses, Oxide Varactor & Diodes. It is an instrument for indoor use in the laboratory, school, workshop, hobby and home application. 2. SPECIFICATIONS Safety Category: IEC61010-1, CAT II 1000V, CAT III 500V and Pollution Degree 2. Common Environment: 23ºC ± 5ºC, less than 75% RH. Temperature ranges: 0 ºC to 40 ºC, 32ºF to 104 ºF for operating condition. -10 ºC to 50ºC, 14 ºF to 122 ºF for Storage condition. Humidity Scope: operating condition less than 90% RH. Storage condition: less than 80% RH. Size: 160(W)x 105(D)x 40(H) MM Weight: 390g approx. (including batteries 3 pcs) Accessories: one set of Test Leads; two Spare Fuses: 0.5A/250V & 10A/250V, Additional Option Accessory, CT-1 special for capacitance measurements 1 set Test Function Range Accuracy Remarks DC V 0-0.1-2.5-10-50-250V-1000V ±3% FSD ±4% FSD. For 1000V Input Impendance: 20KΩ/V Overload protection: Max.1000V AC/DC BUT 0.1V/2.5V/10V 250V Max AC V 0-10-50-250V -1000V ±4% FSD ±5% FSD. For 1000V Input Impendance: 9KΩ/V Overload protection: Max.1000V AC/DC BUT 10V/50Vonly 250V Max Band with: ~10KHz40 DC mA 0-0.05-2.5-25-250 mA, ±3% FSD ±4% FSD. For 10A Drop Voltage: 250mV, overload protected by Fuses 0.5A/250V& 10A/250V at 10A range, and Oxide Varactor <250v, AC/DC(5s) Max.testting time 1 min. for 10A Ω X 1: 0.2~2KΩ Midscale at 20Ω X 10: 2~20KΩ Midscale at 200Ω X 100: 20~200KΩ Midscale at 2000Ω X 1K: 200~2MΩ Midscale at 20KΩ X 10K: 2K~20MΩ Midscale at 200KΩ ±4% of ARC of Scale Length Overload protected by the oxide Varactor & Fuse<250V, AC/DC (5s) Capacitance (uF) 0.025-0.25-2.5uF(C2), 2000uF(C1) ±3% FSD Approximate Value Use the Aaccessory Kit, Use the Rx1K range BATT Check 0~1.5V: GOOD-?-BAD 0~9V: GOOD-?-BAD ±5% of ARC of Scale Length Load current: 270mA for 1.5V 250mA for 9V Overload protected by the oxide Varactor & Fuse<250V, AC/DC (5s) Transistor check hPE: 0-1000 via special Hfe socket Approximate Value At Ω x 10 range Led diod check Via special Hfe socket Approximate Value At Ω x 10 range Decibel -22dB~+62 dB (0dB=1mW at 600Ω) Approximate Value POWER Source Internal Battery: R6P, AA, 1.5V 2pcs, 6F22, NEDA 1604, 9V 1
Call

Bảo hành: 12 tháng

1. INTRODUCTION This Multi-meter is an accurate, safe, battery operated, rear tilt-standby, easy to operate handheld instrument with robust protective holster alongside and the adjustable back tilt device with hook-up design. It can offer accurate, reliable measurements of DC/AC Voltage, DC Current, Resistance and DioDE, LED, Transistor, Decibels, Continuity and Capacitance with very high sensitive quality movement, and good - designed circuit, as well as mirrored AL dial plate esc. It has the perfect full overload & mis-used protection via two Fuses, Oxide Varactor & Diodes. It is an instrument for indoor use in the laboratory, school, workshop, hobby and home application. 2. SPECIFICATIONS Safety Category: IEC61010-1, CAT II 1000V, CAT III 500V and Pollution Degree 2. Common Environment: 23ºC ± 5ºC, less than 75% RH. Temperature ranges: 0 ºC to 40 ºC, 32ºF to 104 ºF for operating condition. -10 ºC to 50ºC, 14 ºF to 122 ºF for Storage condition. Humidity Scope: operating condition less than 90% RH. Storage condition: less than 80% RH. Size: 160(W)x 105(D)x 40(H) MM Weight: 350g approx. (including batteries 2 pcs) Accessories: one set of Test Leads; one Spare Fuses: 0.5A/250V Test Function Range Accuracy Remarks DC V 0-0.25-2.5-10-50-250V-1000V ±3% FSD ±4% FSD. For 1000V Input Impendance: 10KΩ/V Overload protection: Max.1000V AC/DC BUT 0.25V/2.5V/10V 250V Max AC V 0-10-50-250V-1000V ±4% FSD ±5% FSD. For 1000V Input Impendance: 4.5KΩ/V Overload protection: Max.1000V AC/DC BUT 10V/50V/ only 250V Max Band with: 40 ~10KHz DC mA 0-0.1-2.5-25-250 mA, 10A ±3% FSD ±4% FSD Drop Voltage: 250mV, overload protected by Fuses 0.5A/250V and Oxide Varactor <250v, AC/DC(5s) No Fuse at 10A Range Ω X 1: 0.2~2KΩ Midscale at 20Ω X 10: 2~20KΩ Midscale at 200Ω X 100: 20~200KΩ Midscale at 2000Ω X 1K: 200~2MΩ Midscale at 20KΩ X 10K: 2K~20MΩ Midscale at 200KΩ ±4% of ARC of Scale Length Overload protected by the oxide Varactor & Fuse<250V, AC/DC (5s) Continuity Test BUZZ Sounding < 100Ohm Capacitance (uF) 2000uF(C1) Approximate Value Use the Rx1K range BATT 1.5 Check 0~1.5V: GOOD-?-BAD ±5% of ARC of Scale Length Load current: 270mA Transistor check HFE: 0-1000 via special Hfe socket Approximate Value At Ω x 10 range Led diod check Via special Hfe socket Approximate Value At Ω x 10 range Decibel check -22dB~+62 dB (0dB=1mW at 600Ω) Approximate Value At ACV ranges via Jacks POWER Source Internal Battery: R6P, AA, 1.5V 1pc, 6F22, NEDA 1604, 9V 1pc
Call

Bảo hành: 12 tháng

Operating Temperature 0 °C to +50 °C (+32 °F to +122 °F) Storage Temperature -40 °C to +60 °C (-40 °F to +140 °F) Relative Humidity 0% to 90%, non-condensing IP Rating IP40 Operating...
Call

Bảo hành: 12 tháng

Relative Humidity Range 10.0 to 95.0% Temperature Range -20.0 to 140.0°F (-28.0 to 60.0°C) Accuracy ±3% Relative Humidity; ±1.8°F/±1°C Dimensions 5 x 7.7 x 0.9" (129x195x22mm) Weight 12.6oz (357g) Hãng sản xuất : Extech...
Call
1. INTRODUCTION This Multi-meter is an accurate, battery operated, easy – safe operate handheld instrument.The high sensitivities of 20,000 Ohm/V DC & 9,000 Ohm/V AC and good quality meter movement offers accurate, reliable measurements...
Call

Bảo hành: 12 tháng

1. INTRODUCTION This Multi-meter is an accurate, battery operated, easy – safe operate handheld instrument.The high sensitivities of 20,000 Ohm/V DC & 9,000 Ohm/V AC and good quality meter movement offers accurate, reliable measurements...
Call

Bảo hành: 12 tháng

DCV: * 0.3 Ÿ 3 Ÿ12 Ÿ30 Ÿ120Ÿ 300Ÿ 600V, 20 kΏ/V (0.3V : 16.7 kΏ/V ), ± 2.5% of f.s reading. ACV: 12 Ÿ30Ÿ 120Ÿ 300Ÿ600 V, 9 kΏ/V, ± 2.5% of f.s...
Call

Bảo hành: 12 tháng

DC V: 0.3, 3, 12, 30, 120, (20kΩ/V), 300, 1000 (9kΩ/V); ± 2.5% F.S. AC V: 12, 30, 120, 300, 1000 (9kΩ/V); ± 2.5% F.S. (12V accuracy: ±4%) DC A: (50μA), 3m, 30m, 300m,...
Call

Bảo hành: 12 tháng

Specification AC A 5127 6 15 60 150 300A f.s.reading ± 3% AC V 150 300 750V f.s.reading ± 3% DC V 75V f.s.reading ± 3% Ω 0 ~ 1kΩ Central scale 30Ω Rx1...
Call

Bảo hành: 12 tháng

- Multi-functions, mini pocket size. - Air velocity : 0.4 to 20.0 m/s. - Air flow ( CMM, CFM ). - Humidity/Temp., Dew point. - Light ( 0 to 30,000 Lux ). - Pt...
Call

Bảo hành: 12 tháng

- Multi-functions, mini pocket size. - Air velocity : 0.4 to 20.0 m/s. - Air Temp. : oC /oF. - Air flow ( CMM, CFM ). - Air velocity unit : m/s, ft/min., kmh,...
Call

Bảo hành: 12 tháng

Multi-functions, mini pocket size, easy carryout. - Air velocity ( Wind speed )/Temp., Air flow ( CMM, CFM ). - Humidity/Temp., Dew point, Wet bulb Temp.. - Wind chill, Heat index. - Barometer, Altitude....
Call

Bảo hành: 12 tháng

Multi-functions, mini pocket size, easy carryout. - Air velocity ( Wind speed )/Temp., Air flow ( CMM, CFM ). - Air velocity : 0.4 to 20.0 m/s. - Humidity/Temp., Dew point, Wet bulb Temp.....
Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Measuaring range: 1. Temperature: INDOOR 0°C~+50 °C (32°F~122°F) OUTDOOR 50°C +70°C (-58°F~158°F) Humidity: 15%~ 95% (RH) 2. Accuracy: IN/OUT temperature: ±1°C (±2°F°C) at the temperature of 15°C ~ +35°C (59°F ~ 95°F), ±2°C (±4°F)...
Call

Bảo hành: 12 tháng

Specifications: Range Accuracy Resolution Temperature -10 to 60ºC 14 to 140ºF ±1.0 ºC within 0 ºC to 50 ºC ±1.8 ºF within 14 ºF to 122 ºF 0.1 (ºC/ ºF) Humidity 10% to 99%...
Call

Bảo hành: 12 tháng

With the Hygro-Therm, you have acquired a precision electronic instrument for measuaring the temperature, humidity and the highest and lowest values of both (MAX-MIN function). - Limits Temperature from -10°C to +60°C (14°F to...
Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Measuring range: Relative humidity: 1%...to…99% r.H. Tolerance: ±3% from 35%...to…75%, otherwise ± 5% Temperature : -10°C…to…+60°C Tolerance: ±1 °C
Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

The above photo shows the unit, MR-300 with a probe, KG-PA (option) Multi-function type of moisture measurement A wide range of moisture measuring objects by selecting a probe separately for connections Compact built-in printer...
Call

Bảo hành: 12 tháng

The above photo is MR-200 unit with TG-PA probe (optional and separately ordered) Basic type of moisture measurement Optional probes corresponding to applications for wood, paper, mortar/concrete, etc. Large, easy-to-read LC-display with compact design...
Call

Bảo hành: 12 tháng

DC electric resistance type, mini-shaped, built-in probe Measuring by selecting conifers (SOFT), broad leaf trees (HARD) Capable of measuring powdered, sheeted, pasted materials with MC mode Applications Timber, dry timber, building, furniture, woodwork Plywood,...
Call

Bảo hành: 12 tháng

DC electric resistance type, mini-shaped, 6 pieces of measurement ranges Moisture measurement from timber to mortar/concrete, plaster, paper/paper products. MC mode built-in for comparing moisture contents of the other materials. Applications Woods (conifer, broad...
Call

Bảo hành: 12 tháng

DC electric resistance type, easy to operate, mini-shaped, digital Moisture measurement, control, inspection and guidance of various kinds of materials and wooden products. One-touch switching for broad leaf trees (Hard)/conifers (Soft) Quick-easy selection by...
Call

Bảo hành: 12 tháng

DC electric resistance type, easy to use, mini-shaped, digital Moisture measurement, control, inspection and guidance of various kinds of papers and paper products. Specifications Measuring range : 6~40% 1~100 (MC mode) Display resolution :...
Call

Bảo hành: 12 tháng

DC electric resistance type, easy to operate, mini shaped, digital moisture measurement, control and inspection of mortar, concrete, plaster, etc. measurement of concrete without influences of imbedded reinforced bars and concrete density Specifications Measuring...
Call

Bảo hành: 12 tháng

•Auto L.C.R. check •100 / 120 / 1k / 10k / 100k Hz test frequency •20,000 / 2,000 counts display •Backlit •Ls / Lp / Cs / Cp / Rs / Rp / DCR...
Call

Bảo hành: 12 tháng

- 10MHz Single Channel - With TV Sync. Mode - High Sensitivity 5mV/div - Easy to Operate - Low Cost, High Performance - Designed for Education, Student, Hobbyist and Maintenace use
Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Optional; test stand, be connected with FG-5000A, FG-20KG, FG-5000A-232, FG-20KG-232, FG-5005, FG-5020 whole system will be a useful tool for material's tension and compression analysis. - Size : 650 x 250 x 230 mm....
Call

Bảo hành: 12 tháng

Call

Bảo hành: 12 tháng

Hãng sản xuất: CAS Xuất xứ: Hàn Quốc - Khả năng cân: 15kg - Sai số: 5g
Call

Bảo hành: 12 tháng