| PERFORMANCE CHARACTERISTICS |
| General |
| Bandwidth |
20MHz |
| Channels |
2 |
| Display |
3.8 Inch color display with TFT panel (320X240 pixels) |
| Acquisition |
| Mode |
Sample, Peak detect, Averaging |
| Input coupling |
DC, AC |
| Input impedance |
1MΩ ±2% in parallel with 20pF ± 5pF |
| Probe attenuation factors |
1X, 10X, 100X, 1000X |
| Max. input voltage |
400V(PK-PK) CAT II |
| Horizontal system |
| Sampling range |
10S/s ~ 100MS/s |
| Record length |
Max. 6K points |
| Time base range |
5ns/div ~ 5s/div (step as 1~2.5~5) |
| Time base accuracy |
100ppm |
| Vertical system |
| Vertical resolution |
8 bits |
| Vertical sensitivity |
5mV/div ~ 5V/div (Input to BNC) |
| Position range |
±50V(500mV~5V) ±2V(5mV~200mV) |
| Single bandwidth |
Full bandwidth |
| LF Respond (AC, -3dB) |
=5Hz (to BNC) |
| Rising time (typical on BNC) |
≤ 17.5 ns |
| DC Gain accuracy |
±5% |
| Trigger |
| Trigger type |
Edge?Video |
| Trigger slope(Edge) |
Rising?Falling |
| Trigger mode(Edge) |
Auto, Normal, Single, Alternate |
| Trigger sensitivity (Edge) |
DC coupling: CH1 and CH2: 1div(HDS1022M-N:DC~20M,HDS2062M-N: DC~60M)
AC coupling: CH1 and CH2: 1div (50Hz~Full bandwidth) |
| Trigger level range (Edge) |
±6 divisions from screen center |
| Trigger level accuracy (Edge) |
±0.3 divisions |
| Trigger sync(Video) |
Field?line |
| Trigger Sensitivity (Video) |
2 div (PK-PK) |
| Line/field frequency(Video) |
Support NTSC, PAL and SECAM |
| Measurement System |
| Automatic measurement |
PK-PK, Averaging, RMS, Frequency, Cycle |
| Waveform math |
+, -, ×, ÷, INVERTED |
| Waveform storage |
4 waveforms, 4 settings |
| Lissajou's figure |
Available |
| 1X Probe |
| Bandwidth |
DC to 6MHz |
| Attenuation rate |
1:1 |
| Compensate range |
10pf~35pf |
| Input impedance |
1MΩ±2% |
| Input capacitance |
85pf~115pf |
| Input voltage |
150V DC |
| 10X Probe |
| Bandwidth |
DC ~ full bandwidth |
| Attenuation rate |
10:1 |
| Compensate range |
10pf~35pf |
| Input impedance |
10MΩ±2% |
| Input capacitance |
14.5pf~17.5pf |
| Input voltage |
300V DC |
| Adapter |
| Output voltage |
8.5 V DC |
| Output current |
1500mA |
| Li-ion battery |
| |
7.4V, 3500mA |
| Power Supply |
| Voltage |
100 ~ 240 V AC, 50-60Hz, CATII |
| Fuse |
1A, T class, 250V |